WEEDO F192, Руководство пользователя

Страница: 3 / 57

1 2
GB
1. ATTENTIONS
1.1 About the instruction book
This instruction book contains 3D printer’s installation, use, maintenance, common
problems and other important information. Please read this instruction book
carefully before use 3D printer. For 3D printer damage and other damages caused
by violation of safety matters and operation procedures given in the instruction
book, it will be borne by the user.
1.2 Safety Attentions
1. In the printing or just after printing of 3D printers, as nozzle temperature reach
up to 200°C, it is forbidden to touch the printing head directly at this moment.
2. 3D printer is equipped with active air filtration system; it can handle the most
irritating gases emitted after heating of filaments in printing. But if printing is
needed for long time, please use the printer under the well-ventilated environment.
3. As 3D printer is complicated for its structure, if there is fault, please refer to the
instruction book to eliminate the faults. If the fault still can’t be solved, please
contact the after-sales department of company. To the printer maintained by user
without authorization, the company would not guarantee maintenance.
4. As 3D printer is equipped with high voltage inside, it is forbidden to disassemble
the printer by the non-professional staff. To any consequence caused by violation of
this matter, it would be borne by users.
5. Please use the power cable (4) and Print cable (3) provided by company. Any
printer failure and other consequences caused by using the power cable (4) and
Print cable (3) provided by third parties , it would be borne by user.
6
.
There is no memory function of 3D printer, when the 3D printer begin to print
model must to Remain energized.
7
.
When the printer is connected to ReplicatorG software to print, avoiding
computer appears hibernation, Otherwise, Printing is interrupted.