WEEDO F192, Руководство пользователя

Страница: 31 / 57

29 30
GB
5.2.6. Generate GCode
Click the “Generate GCode” button at the lower right, the
following parameter setting window pops up.
1.Slicing Profile. You can choose ABS or PLA from the
dropdown menu.
2.Use Raft/Support. You can choose whether you need a
raft or support in this checkbox.
3.Printing parameters. You can change some settings
such as Layer Height, Object infill, Feed rate and so on;
these settings are described in more detail in the next
section.
5.2.7. x3g File
Start the ReplicatorG, after GCode generation is completed (see section 5.2.5 for
detailed GCode generation process), click the third button on the toolbar to
convert GCodeto x3g file before being sent to your machine.
A pop-up window prompts you for the file name and save path to save your object.
Note: Do not support a file name written in Chinese characters and the file name
has a limitation within 20 characters.