LV-HUB V2.01 14/06/2022
Cluster set up
Master ID Set Up and Connection Diagram
DIP SETTING SEQUENCE VALID FOR 4K4 PRO and 5K3 LV HV ( Not VALID FOR 5K3-XP)
It is important to follow the diagrams below to make the connections in the correct sequence.
Each cluster must have its own unique address, check the DIP chart for CLUSTER 01 and CLUSTER 02~05.
All the batteries in the group FOLLOW the DIP address chart below (see picture):
DIP ADDRESS CHART (CLUSTER 01*)
DIP ADDRESS CHART (CLUSTER 02 to 5*)
WARNING
Only the first batteries of each cluster must be set following the sequence from ID 01 to ID 05 to then assigning the ID number via the
PC SOFTWARE and allowing the HUB to detect the exact number of cluster that is composing the system.
CLUSTER 01
CLUSTER 02 to
05
THE MASTER BATTERY OF EACH CLUSTER MUST BE SET ACCORDING AS PER THIS DIP CONFIGURATIONS
ORDER TO
CLUSTER 1*
CLUSTER 2**
CLUSTER 3
CLUSTER 4
CLUSTER 5
