Page
9
of
17
cylinder is a pressure vessel and should not be drilled, machined, mutilated or damaged in any
way for mounting purposes or to assist in its removal for servicing, any warranty could be
invalidated by such actions. Do not use Stilsons to remove the cylinder as damage will occur.
A cylinder assembly tool is available as an optional extra part number SK4377A
Removing the cylinder will expose the ram, bearing ring and relief valve plug and allow access to
all the seals, note the positions of the relief valves and ensure they are replaced in the correct
positions.
10.
REMOVAL OF THE AUXILIARY CYLINDERS
First remove the hoses from the auxiliary cylinders. Free the lever as described in section 7,
remove the 4 cap screws 035079 and the mounting stud 079044, the cylinders are now free.
Remove the screw and washer from the cylinder rod pin, by pulling the lever away from the
body the cylinders will be free.
