4
ENGLISH
• With the bracket in place, attach the
magnet base of the antenna to the flat
surface of the bracket . The antenna
must be mounted vertically for the best
signal .
2 . Install the Mounting Bracket and Drive
AS100
.
Put your Drive
AS-100
in the Mounting Bracket
(see instructions under Vehicle Installation) and
place it in a convenient location such as a desk
or table top in the room where you will use the
phone . The location should be at least three
feet from the Outside Antenna to avoid
oscillation (feedback) . Your cell phone must be
in the cradle for the Drive
AS100
to
a
mplify the
signal . Use a Bluetooth headset, wired hands-
free device or speakerphone for talking on the
phone .
3 . Attach the antenna to the Drive
AS100
.
Connect the cable from the Outside
Antenna to the antenna connector on the
bottom of the Drive
AS100
. Do NOT plug
in the power supply (next step) until the
Outside Antenna cable is connected to
the Drive
AS100
.
4 . Power up your Drive
AS100
. Connect the
power cable to the mini-USB port on the
bottom of the Drive
AS100
. Then insert
the adapter into the AC power supply
,
sold separately . Use only the supplied
weboost power supply .
6 . Power up your Drive
AS100
. Connect the
power cable to the mini-USB port on the
bottom of the Drive
AS100
. Then insert the
adapter into the vehicle 12V DC power
source . Use only the supplied weboost
power supply . While the Drive 3G-S may
remain on, leaving the Drive 3G-S on
in a vehicle when it is not running may
discharge the battery in a day or two . Also
note that some 12V DC power sources
are shut down when the vehicle ignition
is turned to off . Use a Bluetooth headset,
wired hands-free device or speakerphone for
talking on the phone .
In-Building Installation Option
Note: Home Office Accessory Kit sold
separately
1 . Install the Outside Antenna to a window .
For best results:
• Select a window on the side of the
building where you get the strongest cell
signal .
• Attach the suction cup bracket (sold
separately) to the inside of a window so
the cable will reach the location of the
Mounting Bracket and Drive
AS100
.
Place the bracket as high on the window
as possible .
NOTE: Many modern energy efficient dual
pane windows use a metal coating that may
decrease the strength of a cellular signal,
reducing the effectiveness of the Drive
AS100
. If you have dual pane windows,
consider a weBoost product that provides an
option for mounting an antenna on an
outside wall or roof of a building .
Need help?
• www.techlineglobal.com
