WebGate eDVR MD800M, Руководство по установке

Страница: 54 / 67

54
(5) Fix the assembled HDD and earth cable into case with screws.
(6) Assemble the top cover.
<ote> Caution for HDD Management
1. Replacing ‘SLAVE’ HDD of internal 2 HDDs causes permanent data loss in the SLAVE HDD.
2. MASTER HDD has all the index of stored data including ‘SLAVE’ HDD. Corruption on
‘MASTER’ HDD may cause total data loss. Be careful when handling the main HDD.
3. It is strongly recommended that all data within HDDs should be backed up before replacing a
‘MASTER’ HDD.
When installing one primary disk
(1) When power is supplied to MD800M, “Disk Manager” runs automatically after rebooting. If not, run
it manually in “Menu Utility Disk Manager”.
(2) There is a HDD that is indicated as “[F] IntA”. Select it.
(3) Select “Action” as “Add” and configure a size of alarm partition, and press “Apply” button. Then [F]
is changed to [R].
(4) Press the [EXIT] button to shut down “Disk Manager”. (If recording schedule is set, MD800M will
start recording.)