WWW.WEBER.COM
9
This appliance is Rated for 120
volts - 50/60Hz,
Output: 1500W
2) Open Lid.
3) Make sure the temperature controller is turned OFF.
(Turn control knob counterclockwise to ensure that it
is in the OFF position.)
4) Plug power cord into a protected outlet.
m
The appliance should be supplied
through a grounded GFI outlet, 15 amp
minimum.
5) Before grilling, check that the electronic safety
device on the temperature controller power cord is
working properly.
- Press the “reset” button on the cord. The indicator
light should turn on. Then, press the “test” button.
The indicator light should then turn off.
m
WARNING: If the test function fails
DO NOT OPERATE THE GRILL. Contact
the Customer Service Representative in
your area using the contact information
on our web site. Log onto
www.weber.com.
6) Press the “reset” button on the cord.
7) Preheat the grill. Turn control knob to HIGH
(clockwise). The red light indicates that power is on
and the heating element is heating up. The red light
periodically cycles on and off as the heating element
adjusts, to maintain temperature.
8) Close lid. Preheat time will take approximately 20
minutes, when grilling in a 72˚F air temperature.
Colder temperatures and/or wind can cause longer
preheating times.
Do not exceed 60 minutes total cooking time.
To cook at a lower grill temperature: Preheat
as previously stated. Turn the control knob
counterclockwise to desired setting. Start cooking.
m
WARNING: When red light is off, heating
element may still be hot.
m
WARNING: Do not move the Weber
®
electric grill when operating or while
the grill is hot.
m
WARNING: Completely unwind power
cord. Keep cord clear of cookbox.
1) Plug temperature controller into grill.
m
Always plug temperature controller
fully into grill before plugging power
cord into outlet.
A - OFF
B - LOW
C - MEDIUM
D - HIGH
COOKING ON YOUR ELECTRIC GRILL
5 6
8
RESE
T RES
ET
TEST
TES
T
m
The appliance should be supplied
through a grounded GFI outlet, 15 amp
minimum.
