Weber Markoprint XB4JET Скачать руководство пользователя страница 78 | Manualshive

Страница: 78 / 162

Weber Markoprint XB4JET Скачать руководство пользователя страница 78

Installation and initial operation

72800153 Markoprint XB4JET / XB8JET

Seite 78 von 162

GB

Fig. 31: Photo sensor installation

5.

Connect the light barrier cable to the connector of the photo sensor and tighten.

6.

Using the two screws supplied, mount the light barrier to the print head (Fig. 26) in such a
way that the product to be printed passes the light  barrier before passing the print head.
The photo cell should have an unlimited view to the product (send- and reception diode).
Tighten  the  screws  only  to  the  extent  that  the  plastic  enclosure  will  not  be  damaged.
Alternatively,  another  sensor  may  be  used.  Observe  the  direction  of  movement  of  the
conveyor belt!

7.

Mount optional rotary encoder on production line.

8.

Connect the rotary encoder cable to the rotary encoder connector and fasten.

9.

If necessary, mount an additional screen to protect the print head.

10.

Check data of the public power supply with the technical data of the power supply.



Chapter

, Page 20

Take the electrical connection by correlation only!

11.

Remove the protective foil from the nozzle plate and insert the ink cartridge in the holder.



Chapter

Insert / remove LX ink cartridge

, Page 79

To avoid faults caused by potential differences, the controller must be electrically
connected to the conveyor belt.

12.

When laying the cables, ensure that cables are not tripping hazards and do not lay them

around corners and sharp edges. Avoid abrasive surfaces.

Photo sensor

Conveyor direction

«
...
76
77
78
79
80
...
»

Содержание Markoprint XB4JET



































































































































































Отзывы:

Нет отзывов