Weber Markoprint XB4JET, Руководство по установке, эксплуатации и техническому обслуживанию, Страница: 116 / 162

List of accessories and spare parts 72800153 Markoprint XB4JET / XB8JET
Seite 116 von 162 GB
List of accessories and spare parts
Safety hazard due to incorrect spare parts!
Incorrect or faulty spare parts may affect safety and
cause damage, malfunctions or failure.
Therefore:
– Only use original spare parts from the manufacturer.
Procure spare parts via contracted dealers or directly from the manufacturer.
HP Ink cartridges
Material damage can be caused by spraying ink!
Spitting results in increased ink consumption and can
lead to undesirable contamination of the environment.
Therefore:
Hold an absorbent cloth in front of the nozzle plate of the
ink cartridge.
The specified drying times can be reduced by additional heat treatment (hot-air
blower, IR heater). The open time can be extended by spit pulse programming.
Please note the ink specific settings for head voltage, fire time, spitting and warming.
There is the possibility to set up the ideally standard values for the respective ink type
with the iDesign software or the Web interface.
It makes sense to change the values carefully depending on the application.
After the insertion of a new cartridge the ink counter must be reset and the
temperature measurement must be calibrated. See in the manual of iDesign
software.
The settings can be made with the iDesign software below
Functions / System
settings / Advanced settings .