WWW.WEBER.COM
15
MAIN BURNER IGNITION & USAGE
MAIN BURNER IGNITION
Summary lighting instructions are inside the left-hand cabinet door .
m
DANGER
Failure to open the lid while igniting the barbecue’s burners, or
not waiting five minutes to allow the gas to clear if the barbecue
does not light, may result in an explosive flare-up, which can
cause serious bodily injury or death.
Main Burner Snap Ignition
Note: Each control knob snap igniter creates a spark from the igniter electrode to the burner
lighting tube. You generate the energy for the spark by pushing in the control knob and
turning to START/HI. This will ignite each individual burner.
A) Open the lid (1) .
B) Make sure all burner control knobs are turned off (2) . (Push control knob in and
turn clockwise to ensure that it is in the OFF position .)
m
WARNING: The burner control knobs must be in the OFF
position before turning on the LPG cylinder valve.
C) Turn the LPG cylinder on by turning the cylinder valve anticlockwise (3) .
m
WARNING: Do not lean over the open barbecue.
D) Push the control knob in and turn to START/HI until you hear the igniter snap,
continue to hold control knob in for two seconds . This action will spark the igniter,
the burner lighting tube and then main burner (4) .
E) Check that the burner is lit by looking through the cooking grates . You should see a
flame (5) . If burner does not light on first try, push control knob in and turn to OFF .
Repeat lighting procedure a second time .
m
WARNING: If the burner still does not light, turn the burner
control knob to OFF and wait five minutes to let the gas clear
before you try again or try to light with a match.
◆
TO EXTINGUISH
Push in and turn each burner control knob clockwise to OFF position . Turn gas supply
off at the source .
◆
1
2 4
5
3
The barbecues illustrated in this
Owner’s Guide may vary slightly
from the model purchased .
2
4
OFF
START/HI
MEDIUM
LOW
