SONIC DIGITAL HS MD/MFD
Safety
7
2
Safety
This chapter provides information on the safe assembly, commissioning and opera-
tion of the equipment. It also includes information on the intended use and condi-
tions of use.
2.1
Personnel requirements
NOTE
§
Prior to using and commissioning the unit, these operating
instructions must be read and understood.
Trained and instructed fitters for installation of the ultrasonic generator in large-scale
systems: Installation personnel carry out all installations and adjustments to the con-
trol according to the parameters of the large-scale system as described in these op-
erating instructions.
Personnel trained to operate the ultrasonic generator at the end user: operating
personnel are responsible for correct operation of the unit.
Trained and instructed maintenance personnel at the end user: installation person-
nel carry out all installations and adjustments to the control during setting up opera-
tions, troubleshooting and fault clearance as well as maintenance as described in
these operating instructions.
Specially trained employees of WEBER Ultrasonics.
NOTE
§
Only authorised specialists may
open the ultrasonic generator
and change components or control factory settings.
DANGER!
The sonotrodes activated by the ultrasonic generators can exceed
a sound level of 75 dB(A) at full load. There is a risk of hearing loss.
In this case, the operator must ensure that personnel wear
hearing protection.
Installation personnel
Operating personnel
Maintenance
personnel
Service personnel
Personal protective
equipment
