Weber Rescue Systems AKKUPAC ECO, Руководство по эксплуатации

Страница: 31 / 52

Operation | 31
5.8 B-COMPACT ECO
Operation
One battery as a minimum, or a 230V power supply, must be connected for the purpose of
operation. Press the on/off button on top of the unit to switch it on (button lights up in white
and the motor starts in ECO-mode). Subsequently connect the hose and set the control lever to
position 1 (see page 30). The unit is now ready for operation.
When the unit is switched on the LEDs mounted on both sides are also simultaneously
activated, so that the unit can also be used as a portable spotlight en route to the installation
site.
Only after pressing the pushbutton on the connected work tool does the speed increase
automatically and then decrease again. This saves energy (runtime in ECO mode of 5 hours per
battery) and avoids unnecessary noise.
Battery operation
The B-COMPACT can be optionally operated using one battery, two batteries or a power supply.
Both power sources are always drained in parallel here, whilst the speed or capacity of the unit
is not affected by this.
It is possible to remove the battery from the device again by simultaneously pressing the two
lock releases.
5.9 DPH/DPF 4018 SA (hand pump)
In order start up the hand pump, first turn the pressure relief valve counter-clockwise and
operate the pump lever a few times. This exhausts the air from the pump.
Finally, turn the pressure relief valve fully in a clockwise direction and do not open it again
during subsequent work with the equipment!
It is now possible to initiate the oil flow to the rescue equipment by actuating the pump lever.