Weber Rescue Systems AKKUPAC ECO, Руководство по эксплуатации

Страница: 26 / 52

26 | Operation
5 Operation
5.1
General
To start the unit with an electric motor, the device must be connected to a power source. Then
set the main switch (if present) to position 1 or press the corresponding knob until it lights up
white.
For starting units with combustion engines, please read the accompanying operating manual
from the engine manufacturer.
Special steps for starting the individual units are discussed separately below.
CAUTION!
When using SKS couplings the engine must never be started before
the control lever is out of the „0“ position and the work equipment is
connected! With single couplings this is not necessary.
5.2 E/V 50 T-SAH 20, E/V 50 T-SAH 15 COAX, V 40 S, E/V 50 S,
V 50 ECO, V-ECOCOMPACT
The power unit is operated by the two control levers (between the equipment brackets). The
oil flow in the two hose sets is controlled by these. The middle position of the control levers
represents the „0“ position.
Two-way operation (with turbo function):
In order to feed the entire oil flow into the left
hose pair, both control levers must be turned to
the left.
In order to feed the whole oil flow into the right
hose pair, both control levers must be turned to
the right.