Weber mt SM 82-3, Руководство по эксплуатации и техническому обслуживанию

Страница: 9 / 28

9
The joint cutter of type SM 82-3 is used for cutting work on roads and buildings.
Drive
The compactor is propelled by an air-cooled Honda gasoline engine.
The power is transmitted to the cutting shaft mechanically via a ribbed V-belt and three regular
V-belts.
The cutting depth is set with the cutting depth adjustment wheel and can be controlled on the
cutting depth scale.
The cutting depth adjustment wheel also works as a parking brake.
By turning the cutting disk up, the back left wheel is clamped. The cutting machine is now secure
and will not roll away.
The supply of water from the water tank serves to bind with the dust during cutting with dry
cutting disks. The quantity of water is not sufficient for cooling wet cutting disks. When using wet
cutting disks, there must be a direct connection to the water supply so the diamond disk is cooled
sufficiently.
Start the Honda gasoline engine with the attached reversing starter.
The engine speed is regulated with the accelerator attached to the left of the handle.
The cutting machine is steered and moved forwards and backwards at the handle.
Device description
Operation