Weber mt SM 82-3, Руководство по эксплуатации и техническому обслуживанию

Страница: 21 / 28

21
1
Lubricating the cutting shaft
At the lubrication nipples (1) lubricate both sides of the
flanged bearing of the drive shaft (2) until fresh grease
emerges.
Lubricating the cutting depth adjustment wheel
Remove the protective cap (1) from the lubrication nipple
on the cutting depth adjustment wheel (2).
Lubricate with pressure grease gun until fresh grease
emerges.
Close lubrication nipple (1) with protective cap.
Lubricating the elevation screw
Remove sight cap (1) from the elevation screw guard (2).
Grease screw.
Close elevation screw shaft with sight cap.
1
2
Dispose of oils, greases, cloths soaked in oil, and
replaced parts with oil on them in an environmentally
friendly manner.
1
2
2
Dispose of oils, greases, cloths soaked in oil, and
replaced parts with oil on them in an environmentally
friendly manner.