Weber mt SM 82-3, Руководство по эксплуатации и техническому обслуживанию

Страница: 16 / 28

16
1
1
1
1
Cutting
Open the stop cock (1) at the water sprinkling system.
Enough water should always be supplied for cutting. The
water is only supplied to bind with the dust.
Align the pointer (1) to the marked cut line.
Risk of getting cut on the rotating cutting disk.
Push the gas lever (1) all the way to the front (towards the
machine) to the full throttle position.
Unlock the cutting depth adjustment lever (1) and set desired
cutting depth.
The scale (1) shows the cutting depth set according to
disk diameter.