Weber mt CR 8, Руководство по эксплуатации и техническому обслуживанию

Страница: 18 / 28

18 CR 8
1
1
1
1
1
2
2
1
Clean / change air filter cartridge
Checking the battery / acid level
Unscrew the air filter cover (1).
Remove the air filter insert (1) from the air filter enclosure.
Clean air filter insert as specified by the engine manufacturer
if there is damage or if it is extremely dirty.
Battery acid is extremely caustic. Protect hands and eyes
with suitable protective goggles and gloves.
Remove the cover cap (1).
Check acid level. If insufficient, fill to max. mark with distilled
water.
If lubricating oils and fuel come into contact with skin,
they can cause skin cancer. Upon contact with the
skin, clean affected skin with suitable cleaning agent
without delay.
Select a collection vessel that is large enough to pre-
vent oil from spilling on the ground. Dispose of waste
oil in an environmentally friendly manner (regulation
on waste oils).
Wipe up / off oil slick and oil residue and dispose of
fuel-soaked cleaning cloths in an environmentally re-
sponsible manner.
Completely drain the engine oil as previously described.
Remove the cover cap (1).
Replace oil filter (2) with a new element.
After replacing the filter element seal the filter enclosure
with the cover cap (1).
Changing the engine oil filter
When working in the area of the engine compartment
there is a danger of being burnt!
Danger of scalding due to hot oil.
Pay attention to the “TOP” marking on the oil filter!
Pull the fuel line (2) off the fuel filter (1) on both sides.
Replace the filter with a new filter element.
Change the fuel filter
Open the maintenance cover (1) (fold forward).