Weber mt CR 8, Руководство по эксплуатации и техническому обслуживанию

Страница: 13 / 28

CR 8 13
1
2
1
1
Check the hydraulic oil level when the machine is at
operating temperature. The correct oil level is reached
when the oil is in the middle of the view glass.
Tighten the screws of the attachment plates with a torque of
425 Nm.
Check the hydraulic fluid level
Mounting the attachment plates
Installing the protective mat
Fasten the protective mat with holder, screws, spring-lock
washers and nuts on the base plate front and rear.
Ensure that the protective mat rests under the base plate.
Open the cover (1), remove the gas cap (2), check the fill
level and, if necessary, top off with clean fuel to the lower
edge of the filler neck in accordance with the specification.
Check the fuel level
For work at the fuel system, have a suitable fire-
extinguishing agent at the ready.
Fire, naked light, and smoking is forbidden!
Starting
Open the vandalism flap (1).
Bring the gas lever (1) into full-throttle position.