Webb 1938266001, Оригинальное руководство пользователя

Страница: 13 / 32

13
COLLECTOR
Important: Before you attach the collector, please ensure that the motor is switched off and the blade/tines
are not rotating.
1. Turn the machine back onto it’s feet and transport wheels.
2. Place the locking mechanism (3) on the collector (6) into its lowest position (Fig. 6).
3. Push the collector fully into the frame (Fig. 6).
4. Push the locking mechanism (3) on the collector (6) back into its highest position (Fig. 6).
PLEASE NOTE, THIS MACHINE WILL NOT OPERATE WITHOUT THE COLLECTOR AND LOCKING LEVER FULLY
LOCKED INTO POSITION. THE MACHINE IS FITTED WITH A SAFETY SWITCH FOR YOUR OWN HEALTH AND
SAFETY.
OPERATION
IMPORTANT:
The shredder can only be started if the collection box (6) has been pushed into the frame (5) and the locking
device (3) is in the upper position.
WARNING
Always switch the motor off and remove the electrical plug from the power source before making any
adjustments, repairs, or maintenance.
ELECTRICAL CABLE
1. Always route the electrical cable away from the work area, to prevent it from meeting the cutting device.
2. Plan your route before starting work. Start your work at the nearest point to the electrical outlet and work
away from it.
3. A 13 AMP (BS1363/A) plug must be used, and a 13 AMP fuse must be fitted.
NOTE: If a molded plug is fitted and must be removed, take great care in disposing of the plug and severed
cable, it must be destroyed to prevent engaging into a socket. If the supply cable is damaged, it must be
replaced by a service agent or certificated electrician, to ensure the machine can be used safely
INSTRUCTION MANUAL