Weaver W-957-40, Руководство по эксплуатации

Страница: 5 / 42

5
The instructions and information described in this manual must always be complied with: the
operator will be held responsible for any operation not specially described and authorized in
this manual.
Some of the illustrations contained in this booklet have been taken from pictures of prototypes:
standard production machines may differ slightly in certain respects. These instructions are for
the attention of personnel with basic mechanical skills. We have therefore condensed the
descriptions of each operation by omitting detailed instructions regarding, for example, how to
loosen or tighten the fixing devices. Do not attempt to perform operations unless properly
qualified or with suitable experience. If necessary, please contact an authorized Service
Centre for assistance.
INSTALLATION
Take the utmost care when unpacking, assembling, lifting and setting up the machine as indi-
cated below.
Failure to observe these instructions can damage the machine and compromise the operator's
safety.
Remove the original packing materials after positioning them as indicated on the packaging.
All regulations in force concerning safety at work must be complied with when choosing the
installation position.
In particular, the machine must only be installed and operated in protected environments
where there is no risk of exposure to dripping.
IMPORTANT: fo
r the correct and safe operation of the machine, the lighting level in the place
of use should be at least 300 lux.
Environmental operating conditions must comply with the following requirements:
- Relative humidity ranging from 30% to 80% (without condensation);
- Temperatures ranging from 0° to +50°C.