Weaver W-957-40, Руководство по эксплуатации

Страница: 13 / 42

13
5.1.4 Before balancing, operators should check all the tires and wheels to find the possible
faults. Do not balance the tires and wheels with fault.
5.1.5 Do not exceed the load capability of the wheel balancer and do not attempt to balance
the wheel bigger than the designed dimension.
5.1.6 Wear suitable clothing such as suitable safety suit such as glove, glasses and working
suit. Not wear necktie, long hair, loose clothing. The operators should stand beside the
machine when operation the machine. Keep from the unauthorized personnel.
5.1.7 Before balancing, you must confirm the installation of the wheel suitable. Before rotation,
be sure the nut turn 4turns around the thread shaft and firmly locked on the main shaft.
GENERAL CONDITIONS OF USE
The wheel balancers described in this manual must be used exclusively to measure the extent
and po
sition of car wheel unbalances, within the limits specified in the technical data section.
Furthermore, models equipped with motors must be provided with a suitable guard.
Any use other than those described in this manual is to be considered improper and unreaso-
nable.
Do not start the machine without the wheel locking equipment.
Protective hood plays the role of prevention and safety.
Do not clean or wash the wheels mounted on the machine with compressed air or jets of
water.
Get to know your machine. The best way to prevent accidents and obtain top performance
from the machine is to ensure that all operators know how the machine works.