Weaver W-957-40, Руководство по эксплуатации

Страница: 30 / 42

30
Water NO
Foam NO
Powder YES
CO2 YES
Warning
This table contains general instructions to be used as guidelines for users. All the applications
of each type of extinguisher must be obtained from the relevant manufacturer.
9.DETAILEDMACHINE OPERATION
：
9.1 How to balance a tire?
1 . Switch on the power source
2. Select the cone according to the tire. Assemble the tire on the main shaft of the wheel
balancer and firmly lock it.
3. Input the tire parameter.
3.1 Pull out the scale of the balancer to measure the Di value which means the distance from
the insider of the tire to the body. According to measured reading, the unit of which is cm,
press to adjust the value to make the value displayed in the right side window to be the
measured value. But the unit of this displayed value is mm. eg you should input 55mm if the
measured value is 5.5cm.
3.2 Use the width measurement scale to measure the Bre
。
you can press to input the Br
value which is the implied value with the unit of inch. If you want to convert this value into the
value with the unit of mm, press to realize the conversion between the units.
3.3 Check the D value, which means the diameter of the rim, marked on the tire. Press