
ENGLISH
9
Pool Preparation
- If there are stones, roots or metal corrosion in contact with the underside of the liner, discard them prior to using the
pool vacuum. If necessary, seek assistance from a qualified professional.
- If the liner is brittle, damaged or wrinkled, contact a qualified professional to perform the necessary repairs or perform
a liner replacement prior to using the pool vacuum.
- If you are using a saltwater pool, make sure all salt are dissolved before placing the pool vacuum into the water.
OPERATION
WARNING!
•
Make sure the pool vacuum is off.
•
Do not use the pool vacuum if any damage is detected.
•
Oil stain could occur due to possible leakage of lubricants applied to the
O-ring.
•
Make sure the pool vacuum is fully immersed in the pool before initiating
operation. The minimum water level required to operate the pool vacuum
must reach above the power ON/OFF switch of the pool vacuum when it is
held in a vertical position. Operating the pool vacuum when it is not
immersed correctly could damage the unit and void the warranty.
•
DO NOT use the pool vacuum without an intact filter cone in place. Using
your pool vacuum without an intact filter cone in place will VOID your
warranty.
•
DO NOT leave the pool vacuum in the water when it is not in use.
•
Ensure the charging plug is detached before the pool vacuum is deployed.
Содержание EV60
Страница 100: ...99 NOTE NOTA NOTITIE NOTIZEN...
Страница 101: ...100 NOTE NOTA NOTITIE NOTIZEN...