STEP 8
Repeat step 6 with the rear cross member,
making sure the Weather Guard® logo faces
upright and towards the tailgate.
Use locking pins (Part H) instead of nuts and bolts.
STEP 9
Install front hoop, making sure the air foil is pointing
downward. On each side, use (1) Part C,
(1) Part L, (1) Part F to install the hoop to
the front assemblies.
STEP 10
Install support brackets if the truck is less than 8’ using
(4) Part D, (4) Part L, and (4) Part F on each side.
This will be installed within 1 inch of the bend on the
driver side and passenger side front arms.
REAR RACK ASSEMBLY
REAR
CROSS MEMBER
FRONT HOOP
SUPPORT BRACKET
SUPPORT BRACKET
5
©2019 WernerCo
