RACK INSTALLATION
STEP 11
Install the front (cab side) mounting feet to the truck bed. Place the mounting foot onto the truck bed placing the foot as far forward
as possible. Find the most appropriate hole that aligns with the center of the stake pocket. Insert the hardware, using (1) Part J,
(1) Part C, and (1) Part M, into the stake pocket and thread the stake pocket bracket (Part J) to the end of the bolt.
Insert the stake pocket bracket into the stake pocket by tilting the foot assembly and inserting the bracket diagonally into the stake
pocket. Loosely tighten the stake pocket bracket then install the no drill mount bracket (Part E) to the rear most mounting foot
clamp insert hole using (1) Part A, (1) Part K, and (1) Part E. Tighten hardware, making sure mounting foot is secured to the bed rail.
STEP 12
Install rear (tailgate side) mounting feet to the truck bed. It is recommended to use the single center hole in the mounting pad for
securing the rear feet when possible. (If the vehicle is a 2016 or newer Chevrolet/GMC truck refer to Step 13). Insert the hardware,
using (1) Part J, (1) Part C, and (1) Part M, into the stake pocket and thread the stake pocket bracket (Part J) to the end of the bolt.
Insert the stake pocket bracket into the stake pocket by tilting the foot assembly and inserting the bracket diagonally into the stake
pocket. Loosely tighten the stake pocket bracket then install the no drill mount bracket (Part E) to the front most mounting foot
clamp insert hole using (1) Part A, (1) Part K, and (1) Part E. Tighten hardware, making sure mounting foot is secured to the bed rail.
6
NOTE
: The front driver side foot is the same as the rear passenger side foot. The front passenger side foot is the same as the rear driver side foot.
©2019 WernerCo
PRO TIP:
1. When installing the mounting feet and utilizing
the stake pocket bracket, always use the furthest
no drill mounting location from the stake pocket
when possible. If your bed has structure in the
way of installing the no drill bracket in the
furthest mount from the stake pocket, use the
center mounting location.
2. If your truck does not have stakepockets, use 2
no drill brackets. Always use the closest
mounting location to the leg, as well as one of
the other 2 locations. When possible mount
using the outermost mounting locations.
