WE-EF KTY234, Инструкция по установке и обслуживанию

Страница: 7 / 20

In case of component failure due to abnormal circumstances or at end of life, replacement must be carried out
E\DVXLWDEO\TXDOLƂHGDQGWUDLQHGSURIHVVLRQDO
Warning: Do not open the luminaire or remove the bollard head while mains supply is switched on.
The luminaire head unit B is factory sealed, warranty will be void if opened without authorisation from WE-EF
Lighting or nominated agent.
X
X
'Rear' of
Bollard
' Front ' of
Bollard
X
X
ZFY230/CFY259 Head
KTY234 Head
5
X
To remove head
To insert head
u
j
k
l
v
into the body and
v
rotate clockwise. When seated,
w
secure
the head
by tightening screw
X
.
bollard body. To re-attach the head, a
lign it to the bollard post as shown below
,
u
drop the head
j
Release the grub screw X and
k
twist the head counter-clockwise, then
l
lift the head off the
Head Removal
bollard with the WE-EF logo at the front of the bollard .
For
ZFY230/CFY250,
The bollard post should be mounted that the grub screw X is the back of the
is secure by ensuring head cannot be rotated once grub screw secure.
For
KTY234, ensure that the slim shield on the LED head lines up to the grub screw
X
. Confirm head
w
To remove head To insert head