WE-EF KTY234, Инструкция по установке и обслуживанию

Страница: 16 / 20

Installation Instructions
1. NOTE: It is the responsibility to the installer to
ensure the suitability of the ESV planted root for any
local or national structural requirements for the
installation, and that the planted root is suitable for
the site specific conditions.
The instructions are a guideline for installation to
these requirements and provide the detail for
installation orientation and mounting details.
2. Please note, the ESV must be orientated correctly
for different products. In both instances the conduit
entry can be rotated to match cable routing.
When the ESV is being installed for the following
products: KTY234 / KTX234 / ZFY230 / CFY259,
please orientate the bolt pattern as shown (base
plate is 45° to the pathway). For this installation, use
the 40mm long M8 bolts supplied
3. For all other product please orientate the bolt
pattern as shown (base plate is parallel to the
pathway). For this installation, use the 25mm long
M8 bolts supplied.
4. Orientate ESV as required and fit the electrical
connections/conduit.
3
Pathway
Pathway