WDT DUFTDOS-AK1, Руководство по эксплуатации

Страница: 21 / 34

DUFTDOS-AK1 and AK2 dosing device
Index: 01 Date modified: 01/02/2023 OI No.: BA DW 039-01 DUFTDOS-AK1+2 NT35-R EN.docx Page 21 of 30
6.3.13 Config / password protection / push button
In the Config menu, password protection can be activated and configurations can be set for the push
button illumination.
Config - password entry
The Config menu itself is always password-protected.
The password is preset and cannot be changed.
The password is: 0123
If an incorrect password was entered, the display jumps back to the main menu.
Config - Switch password protection on and off
When password protection is activated, the following parameters are protected with
a password.

Dosing time

Pause time

Push button cycle

Operation mode

Language
Password-protected menus are marked with a padlock symbol in the main menu.
Config - Configure push button
The push button light can be configured individually here.
Output:
A signal reversal of the push button output is possible here. The setting depends on
the type of push button.
Dim on:
Set the brightness level of the push button illumination when the push button cycle
is active.
Dim off:
Set the brightness level of the push button illumination when the push button cycle
is inactive. This means: No fragrance is produced
For device type AK2: Repeat the procedure for push button 2.
6.4 Button plate function
By pressing a push button, the cycle time for fragrance generation is started
and the fragrance is blown into the cabin.
This function is active in the push button operation mode.
The button plate is available as a 1x or 2x version, depending on the device
design.
With the device type AK2 (2x push button), the desired fragrance can be
selected via the push button.
6.5 Fill/replenish fragrance concentrate
See Commissioning, Chapter 5.2.1, Fill/replenish fragrance concentrate
Figure 20, Button plate
Fragrance 1
Fragrance 2