WDT DUFTDOS-AK1, Руководство по эксплуатации

Страница: 19 / 34

DUFTDOS-AK1 and AK2 dosing device
Index: 01 Date modified: 01/02/2023 OI No.: BA DW 039-01 DUFTDOS-AK1+2 NT35-R EN.docx Page 19 of 30
6.3.3 Dosing time
The dosing time defines the time period during which the small compressor runs and
the fragrance is blown into the cabin.
Select the desired fragrance, set the dosing time for the fragrance and navigate back
to the main menu with the Enter key.
The dosing time is counted down in the operating menu during dosing.
6.3.4 Pause time
The pause time defines the time period between 2 dosing times.
Select the desired fragrance and set the pause time.
The scenting is locked for the set time period.
The pause time is counted down in the display.
6.3.5 Push button cycle (in push button operation mode)
The push button cycle defines the cycle time during which the set dosing and pause
times are constantly repeated. The push button cycle is started via the corresponding
push button in the cabin.
Set the desired time for the push button cycle and navigate back to the main menu
with the Enter key.
The cycle time can only be set in the push button operation mode.
6.3.6 Test output
Tip!
“Test functions” are used for function control in order to narrow down possible faults.
For test functions, the time is set to 20 seconds and cannot be changed. The test func-
tion can be prematurely cancelled with the Enter key.
Select the desired test function and start with the Enter key. The corresponding out-
put is activated for 20 seconds. (Push button is illuminated, compressor is running.)
A running test can be cancelled with the Enter key.
Only for the AK1 with heated nozzle, an additional test is displayed where the
heater’s power consumption can be read. At a value of 60 to 100 mA, everything is
fine.
Use the ESC key to navigate back to the main menu.
For the version with a heater, the compressor and heating test functions are addi-
tionally available.
Error