6
Version 2: August 4, 2020
Step 7
-
Install back top rail using 2 end lid brackets on back side of the unit. Corner posts are taller for the back side.
Note: Top rear rail has three top holes and is an “L” shaped bend –
no channel. Make sure that the rail attaches to
outside of rear posts and is level with the top of the post.
Finger Tighten Only?.
*If only one person is doing the assembly, follow step
“
a
”
below.
a.
Attach one end with one bolt/nut loosely. Raise rail and attach the other end.
With both ends attached,
tighter the 4 bolts on each end
making sure that the
lid support brackets are level
with the
top of the corner posts as shown in photos above
Step 8
–
With top, rear rail in place, i
nstall the two rear, vertical support bars (“L” shaped) using angled holes
positioned
so that they are vertical to attach to the top and bottom rail. The large oval holes go at the top for the bag rod. Tighten
all bolts.
Take new picture of rear support rails and add here.
Left and Right
Holes for
Vertical
Support Rails
For Center Lid
Support
Bracket
Back Top Rail
End view of Rear
Bag Support
Bracket and top
View from rear of
End Support Bracket
attached with Rear
Top Rail.
Bracket should be
level with top of
post.
