2) ADJUSTING THE SEAT AND THE HANDLEBARS
It is important to adapt the settings of your bike to your body type.
Seat
To check the correct height of the seat, you must be seated with your legs outstretched and
your heel resting on the pedal (fig. A). While pedalling, your knee will be slightly bent (fig. B).
When adjusting the seat to its lowest position, make sure that it does not touch any part of the
bike, such as the protective cover of the battery.
Similarly, make sure not to exceed the maximum mark.
Handlebars
The handlebars of your bike can be adjusted both in height and tilt.
Setting the height and tilt of the handlebars
Your bike is equipped with an adjustable stem without tools. To adjust your stem, you can do
the following:
Step A: Press button .
Step B: Pull up the lever .
Step C: Adjust inclination of the stem and position of the handlebar. Screw the horizontal screw
to tighten the steering set according to the torque specified in the torque table. See paragraph
IV MAINTENANCE.
Step D: Push the lever back down and close it.
155
156
Remember that the more you use the assistance, the more quickly the battery will discharge.
Power level
The current power level is displayed on the control panel with a power curve that appears from left to
right.
Lighting of the display light and the headlight and taillight of the bike
To turn on the display light and your bike lights, press the “Light” button. The switch-on of the lights is
displayed on the control panel.
To switch off the lights, perform the same operation.
Start-up assistance
Your Dandy is equipped with a start-up assistance system.
Without pedalling, your motor will move the bike at 6 km/h. This feature can help you in rugged and/or
uneven roads.
To activate this function, press the 'Pedestrian' button. As soon as the selector returns to the rest
position, the 6 km/h assistance stops.
Phone connection function
Your bike is equipped with a phone connection function. The function is activated automatically, when
you approach a device that equipped with the communication system. The blue LED lights up on the
console, when the function is activated.
Press the “Up Arrow” and “Down Arrow” buttons simultaneously to reset the phone connection function.
You can download the application via this Internet link: https://goo.gl/fJHCqR.
2) Battery
Directions for first-time use
Please recharge the battery for at least 6 hours on first charging. This initialises the battery.
The battery is supplied with a minimum charge, it is VERY IMPORTANT TO CHARGE IT AT A
MINIMUM OF 2 HOURS EVERY 2 MONTHS.
To properly charge your battery, follow these steps:
KEY
LO
CK
