920943 Rev E July 2014
25
6.6
Register Power Reset
Under normal operating conditions, the reset should be lubricated once per year.
Make sure power to the dispenser is turned off before opening or lubricating the reset. Failure
to do so may result in a hazardous condition that can result in serious injury.
Do not lubricate the reset motor bearings! The motor bearings are self-lubricating and over-
lubrication may damage the bearings.
Step 1
Remove the reset cover by removing the cover bolts. Use care to prevent nicks or
scratches on the flange surface of the cover.
Step 2
Use Anderol L-795 Grease and Anderol 401-D Oil or equivalent to lubricate the points
as shown in Figure 6-1.
Step 3
Replace the cover and bolts. Mating surfaces of the cover and reset box must be free
of dirt or debris to ensure a good seal. Make sure all bolts are used and securely
tightened.
Figure 6-1 Reset Lubrication
WARNING
CAUTION
= Grease
= Oil
Содержание Reliance G6101D
