Wavin Tempower Control Manual
Wavin Tempower Control
Heating and Cooling systems
.
Wavin Tempower Control Manual
Wavin Tempower Control
Heating and Cooling systems
.
7
Design Manual
TELEPHONE
+31 (38) 4294911
4
www.wavin.com
4
4..4
4 F
Fu
un
nc
cttiio
on
ns
s
4.4.4.
ON/OFF function
The on/off button will turn off the heating or cooling in the room:
when the thermostat in off mode then the actuator(s) is in the
closed position. This function can be activated by the room
thermostat (default) or via a master thermostat or the building
management system.
4.4.1.
Temperature setting
The device defaults to the winter or summer reference
temperature of the current operating mode. The default reference
temperature for summer is 26
°
C, and for winter is 21
°
C. The
temperature setting range from the reference temperature is +/- 6
°
C (default). Temperature settings can be adjusted by the touch
buttons or by holding and moving the fingers on the touch surfa-
ce.
Ready for setting.
Addressing:
Please follow these steps to address the DRT-200
in right way:
-
Press the heating/cooling buttons minimum 3
seconds until the confort/economy buttons are
illuminate.
-
Press the comfort/economy buttons minimum 3
seconds until the heating/cooling buttons are
illuminate.
-
Press again the heating/cooling buttons minimum
3 seconds until all LED off.
-
Set the requested address 1-7 according to
the picture.
-
Save the new setting with press the On/Off
button.
Design Manual
Heating and Cooling systems
Design Manual
Heating and Cooling systems
