wavin DRT-200, Руководство по конструкции

Страница: 12 / 48

Wavin Temp Manifold Installation Manual ower
E-MAIL
info@wavin.com www.wavincom .
TELEPHONE
+31(38)429411
12
Wavin Temp Control Manual ower
E-MAIL
info@wavin.com www.wavincom .
TELEPHONE
+31(38)429411
5 5..3 3 C Co on nttrro oll 7 7 rro oo om m tth he errm mo os stta atts s
A WTC-3 base unit can connect up to 7 room thermostats.
Two (2) types of room thermostat can be connected :
Analogue thermostat with unless power contact and/or
Wavin DRT-200 digital room thermostat
5.3.1. Analogue room thermostat
.
Design Manual
Heating and Cooling systems
Design Manual
Heating and Cooling systems
W Wiirriin ng g:
All wiring must comply with local electrical regulations and
specifications. Wavin recommends 18 AWG LVT or similar wire for
all thermostat connections. Strip all wires to 1/4 (6.3 mm) to
ensure proper connection to thermostat terminal blocks.
N No otte e:
Reversed polarity will not damage the room thermostat
C CO ON NN NE EC CT TIIO ON N: Every room thermostat must be wired directly to
the WTC-3 base unit.
N No otte e:
Circuit number 6 is preset only for heating as a default
(Program 1 and Program 2, see pag 17 and following).
The First 5 circuits may be used to connect a dew point
sensor.
Out of use circuits must be connected in parallel with
the changeover input of the heating and cooling.
Design Manual
Heating and Cooling systems
Design Manual
Heating and Cooling systems
Design Manual
Heating and Cooling systems
Connection 7 Analogue room thermostats.