10 of 11
WX-501-0534 • 01.22
Sync to channel
Allows you to synchronize channels with other servers.
Sync Channel
Allows you to choose the channel number to synch to. This number must be lower than the RF
channel.
DES Encryption
Allows you to encrypt data going across radios.
DES Key
Must be the same on all radios you are using.
The
900 MHz > Config 3
tab contains timeout settings (see the figure and table below).
Setting
Description
RF Packet Size
Allows you to set the maximum size of an RF packet before it is sent.
Interface Timeout
Allows you to set the amount of time in milliseconds to wait until your buffer is full before sending.
Transmit Retries
Allows you to set the number of times the radio will transmit after not getting a response (Address
mode).
Broadcast Attempts
Allows you to set a number of times the radio will broadcast after not getting a response
(Broadcast mode).
System ID
Allows you to set a network password.
Under the
Diagnostics
tab, you can run diagnostics on your device (see the figure below). Click the
General
or
900 MHz
buttons to run diagnostics on the items listed below each button. If a problem is detected, the program
will display a red square next to the item in question. If no problems are detected, a green circle will appear.
Once you have finished, use the menu bar at the top of the screen to save your settings, return to the Select
Driver screen, and more.
