First you will find a low-pass filter on the left side. This is con-
nected upstream of the entire signal processing. You can
change the slope of the filter via the dropdown to the left of the
cuto
ff
control. The slope is given in dB/octave.
The
Cuto
ff
defines the split point between the resonance and
attack sample. However, you can freely select the cuto
ff
of the
filter between 50Hz and 1000Hz.
Additionally, you can add a resonance of up to 12dB via the
Q
control. Whether this always makes sense, you are free to argue.
Furthermore, we have added another Low Shelf filter to give you
the possibility to boost the low end of your sample "a bit". To do
this, set the cuto
ff
to the desired frequency below which you
want to boost. Then turn the
dB
control to the desired gain. For
the bass boost you also have a frequency range of 50 - 1000Hz
at your disposal.
26
Содержание WaveR8
Страница 1: ......
