High Frequency Part
"Load HF Sample" button
Adds a sample to the High Frequency part only. You can think
of the part as a kind of channel that the sample runs through
from top to bottom. This part represents the independent at-
tack sample.
Waveform display
Here you can see the waveform of the attack sample in its al-
ready processed state. You can watch every change of the sam-
ple live here. The length of your sample can be seen below the
waveform display.
Pre-Processing section
This part of the processing takes place exclusively in the soft-
ware, i.e. independently of the R-8. Here you have a high pass
filter with resonance, a treble booster, an ADSR envelope to
shape your sample in advance, and a bit crusher.
If you don't want any pre-processing, you can deactivate it
with the checkbox at the upper left edge.
Post-Processing section
These parameters only a
ff
ect the processing in the R-8. For
the editor's internal player, we have tried to emulate the R-8
as best we can in software.
16
Содержание WaveR8
Страница 1: ......
