Wavelength Electronics LFI-3751, Руководство пользователя, Страница: 87 / 132

87
4
Chapter 4 - Remote Interface Reference
End Code Listing
End Code Listing
00
01
02
03
04
05
20
21
22
23
24
25
26
27
81
End Code
Normal Ending - No errors
Command Type not supported (Valid values are ‘1’ or ‘2’)
Illegal ASCII digit contained in Command Code or FCS fi eld
Data fi eld Char 7 must be ‘+’ or ‘-’
Data fi eld Char 3 must be ‘.’
Data fi eld Char 6, 5, 4, 2, 1, or 0 contains an illegal ASCII character (not ‘0’ to ‘9’)
Command Type not supported for Command Code (for example, executing an ACT T
measurement with ‘2’ = WRITE as Command Type)
PASSWORD protected data - no PASSWORD issued prior to command execution
Command Code not implemented
FCS does not match computed FCS for this Command Packet
Parser programming error. Please contact factory.
Write command requires ‘1’ or ‘0’ in one of the data characters. Invalid ASCII value found.
Query Calculation Error. Instrument unable to calculate requested measurement. Data
returned is ‘+999.999’
Sensor Confi guration data written while Output is on. Sensor Data unchanged.
RS-232 Lamp Control Write Error- Data characters not valid. One test state allowed per write.
Ignoring the decimal point, data must translate to a binary value of 0, 1, 2, 4, 8, 16, or 32.
Description