1
Read this manual,
ideally from start to finish, so that you understand the whole
installation process before you begin.
2
Find the best antenna location and direction
(Pages 6-7)
.
This step is the most
time-consuming, but it’s worth the effort and has a huge impact on your system’s
performance.
Make notes of your readings in the table on page 15.
3
Verify performance and connect everything
(Pages 8-9)
.
Before making any holes in
your roof or walls you’ll fully connect your system and run speed tests. If everything
looks good, you’ll finalize the cable runs and hard-wire everything.
4
Mount your QuadPro
(Page 10-11)
.
You’ll assemble your QuadPro with its FlexMount
and mount it to your building.
5
Tell us how your system is doing.
Nothing makes our day like hearing from customers.
And if for any reason you’re not seeing the results you were hoping for, we can help.
Call
(800) 761-3041
, or book a meeting at
waveform.com/meet
. We’re available from 6am-5pm PT, Monday to Friday.
How Much Improvement Should You Expect?
In short: It’s hard to say.
Many people see an increase in data rates of between 50% and
200%
, but some people may only see 10%. Despite all the science, wireless signals often work
in strange and magical ways.
One thing is for sure,
the more locations and directions you try the more likely you are to see
a big increase in data rates
. If you’ve gone through this manual and aimed the QuadPro as we
suggest, but you’re still not seeing much improvement,
please reach out to us for help
.
What Tools Do You Need?
Your QuadPro includes all of the tools necessary for its assembly, but you may need
additional
tools
to mount it against your building.
Please refer to your mount(s) included manual(s) or find them online at
waveform.com/flexmount-manual
and
waveform.com/ultrapole-manual
, respectively
.
Install Process Overview
01
5
