background image

 

Installation Instruction for CMAX Antennas

 

Page 1 

 M0149A0B_Installation_CMAX-DM-CPUSE

 

Installation Guide for CMAX-DMxx-CPUSExxx and 

CMAX-3030-CPUSEI53 Antennas 

 

Note:  Please read the complete description before starting the installation. Make sure that 

connectors are properly sealed against water if no cables are connected to them 
after installation. 

 
Tools required:

 Wrenches

, width 13 mm and 16mm 

(We recommend using socket wrenches.)

 

1. Assembly 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
Fit the three parts together and fasten with screws M10, spring washers, and washers 
(M10 torque: 43 N-m). 

 

Washer 

Spring washer 

Screw 

Содержание CMAX-DM CPUSE Series

Страница 1: ...mplete description before starting the installation Make sure that connectors are properly sealed against water if no cables are connected to them after installation Tools required Wrenches width 13 mm and 16mm We recommend using socket wrenches 1 Assembly Fit the three parts together and fasten with screws M10 spring washers and washers M10 torque 43 N m Washer Spring washer Screw ...

Страница 2: ...ece with appropriate screws not part of the delivery 4 Insert the mount into the lengthening piece and fasten it with the four screws spring washers and washers 3 Pole Mounting 200 mm max pole diameter 1 Lay proper lashing straps around pole and lead them through mounting bracket 1 2 Adjust bracket in antenna direction and fasten the bracket 2 3 The antenna bracket can also be fastened to the pole...

Страница 3: ...s again M10 torque 43 N m Screw joint antenna bracket Attach antenna and fasten it with washers and M8 nuts M8 torque 27 N m Depending on space available and adjusting angle the DMxx 3030 antenna can be mounted onto the pedestal in 3 alternatives see circle marks in picture to the left 4 2 Azimuth Angle 1 Loosen the four fixing screws Top and bottom Do NOT unscrew them completely 2 Adjust your des...

Страница 4: ...on Changes Release Date M0149A0A 20 October 2015 M0149A0B chapter 3 updated max pole diameter 27 October 2015 CommScope reserves the right to change all hardware and software characteristics without notice COPYRIGHT Copyright 2015 CommScope Inc All Rights Reserved This document is protected by copyright No part of this document may be reproduced stored in a retrieval system or transmitted in any f...

Отзывы: