Now that you have all the components in your system connected and
you’ve verified that you
are happy with your data rates,
it’s time to permanently mount your QuadPro!
Your QuadPro, equipped with the FlexMount, can be
installed against a pole or directly onto
the exterior of your building
.
Mounting your QuadPro with the FlexMount
For the full instructions, follow the FlexMount’s
included manual, or find it online at
waveform.com/flexmount-manual
, then
resume this manual
to complete your installation.
If your kit includes the UltraPole
, refer to its included manual, or find it online at
waveform.com/ultrapole-manual
for additional instructions on its assembly for your system.
We’re Here to Help!
We know that every use case is different and the steps for mounting your antenna may differ
for your unique location.
Don’t worry!
If you’re running into issues, or have any questions, just
reach out.
Mounting Your QuadPro
04
Secure the FlexMount to
your wall using its
wall
screws and anchors
.
or
Secure the FlexMount
to your pole using its
U-bolts
.
1
Use the provided
socket
wrench
to remove the
installed
washers
and
nuts
from your
QuadPro.
2
Place the
bolts
of your
QuadPro
through your
FlexMount
and reinstall
the
washers
and
nuts
.
3
• Mount the QuadPro with its cables facing downward
to ensure proper weatherproofing
.
• Create a small “drip-loop” in your cables
before they enter your building to help prevent water from
entering your building.
• When wall mounting,
position your FlexMount against the wall and mark the locations of its holes with a
pencil or marker before drilling any holes.
Install Tips
10
