manualshive.com logo in svg

WAVECONTROL SMP2, Руководство пользователя

Поделиться
Скачать
WAVECONTROL SMP2 Скачать руководство пользователя страница 75

Once the measurement behavior is defined, the next step is to choose the 

“Time” option on the “MODE” dynamic menu (screenshot 1B).

To start the measurement, now all that you need to do is select “LOG” on the 

dynamic menu (screenshot 1C).

In time mode, the WP400, WP400-3 and WPH-DC (DC+AC or AC) have a 

PLOT function in the dynamic menu, where the user can select the RMS 

only (screenshot 1D) or Peak only (screenshot 1E) or both RMS and Peak 

(screenshot 1F) plots.

2. Selective measurement (FFT)

The 

SMP2

 + 

WP400

 (or 

WP400-3

 or 

WPH-DC

) allows you to make selective 

measurements by means of real-time FFT-based signal analysis using digital 

signal processing techniques. This can be done for both the E field and the H 

field, over different frequency spans: 40 Hz, 400 Hz, 4 kHz, 40 kHz or 400 kHz 

(depending on the probe):

• WP400 and WP400-3:

 400 Hz, 4 kHz, 40 kHz or 400 kHz (E and H)

• WPH-DC:

 40 Hz, 400 Hz, 4 kHz, 40 kHz (H field only)

Screenshot 1D

Screenshot 1E

Screenshot 1F

User’s Manual 

Electromagnetic Field Meter SMP2   

P.

 73

Содержание SMP2


































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды