WAVECONTROL SMP2 Скачать руководство пользователя страница 14

Страница: 14 / 97

The bottom of the

SMP2

holds the other connections of the equipment.

• Mini USB connector and fibre optics:

allows connection to a PC in order to:

• Download data stored in the

SMP2

memory.

• Update firmware for the equipment.

• Control the unit remotely.

• Battery charger connector:

allows the

SMP2

battery to be recharged using

the charger supplied with the equipment.

• ¼’ screw connector:

takes a ¼’ screw, the standard screw used for most

tripods, allowing the

SMP2

to be mounted on a tripod.

4.2. Field probes

The

SMP2

is a highly versatile EMF measurement device that requires

connection of the proper field probe to obtain the best results for each

application. Only

Wavecontrol

field probes will work with the device.

If the device is switched on with no field probe attached, it will not show any

field value and therefore no measurement will be saved to memory. However,

saved data and GPS positioning functions will be available.

The

SMP2

automatically detects the type of field probe and its calibration

parameters.

Mini USB connector

Charger connector

Tripod ¼’ screw

Fibre optic

connector

Figure 4:

Bottom

User’s Manual

Electromagnetic Field Meter SMP2

Содержание SMP2


































































































Результаты поиска

Содержание SMP2

Отзывы:

Бренды по названию

Популярные бренды

WAVECONTROL SMP2, Руководство пользователя

Результаты поиска

Содержание SMP2

Отзывы:

Бренды по названию

Популярные бренды