Wavecom TNT+ страница 4 Скачать руководство пользователя

Страница: 4 / 36

Page 4

Safety Warning

When using any electrical appliance SAFETY must always be observed.

Testing appliances is no exception and in fact MORE care must be

taken to ensure personal safety is met.

Although the TnT range of products has been designed to meet

stringent requirements, no person can be completely protected against

the consequences of the incorrect use of an electrical device.

We advise that appliance testing should be conducted by a competent

and suitably trained person.

For maximum safety, always ensure that the following advice is

followed;

•

The equipment being tested is in good repair.

•

All user instructions are followed.

•

Double check power supply connections (LEDs).

•

Always use specified fuses and protection devices.

•

Do not use leads that require repair or are damaged.

•

If you are unsure, call a Licensed Engineer/Electrician.

Содержание TNT+





































Результаты поиска

Содержание TNT+

Отзывы:

Похожие инструкции для TNT+

Бренды по названию

Популярные бренды

Wavecom TNT+, Инструкция по эксплуатации

Результаты поиска

Содержание TNT+

Отзывы:

Похожие инструкции для TNT+

Бренды по названию

Популярные бренды