10 - EN
10 - ITA
a
d
b
c
Steering wheel configuration
To start the first configuration of the Wave Impact Steering
wheel, it is
required to install the SimHub software supplied on the
pen drive included.
• Copy the files WaveImpact.hmistruct and WaveImpact.sam-
ple. ini in the SimHub installation directory:
\SimHub\NextionTemplate.
• Launch the SimHub software.
• Select
Arduino
(a) from the left drop-down menu.
• Select
My Hardware
(b) and click
Single Arduino
(c).
• Select
Scan only selected ports
(d) at the bottom part of the
screen.
• Select the COM port referring to the communication of the
steering wheel LEDs.
!
Check the correct COM port on the Windows
Device Manage-
ment
interface.
