Wave Idea Bitstream PRO Скачать руководство пользователя страница 7

 

 
 
 

Rev 3.1 - Page  

7

 

 

SHIFT Function 

 
When simultaneously pushing MIDI channel UP & DOWN, the SHIFT function is active until one of the 
two MIDI channel pushbuttons is released. 

Displaying switches state 

 

Once the shift function is active, all the 8 switches state are displayed on LCD, as follow: 

 

 

 

 
The 8 switches state are shown in a set of 8 characters (4 top switches followed by all 4 bottom 
switches): 

. _ means the switch is pushed (or toggled to ON) 

 means the switch is relaxed (or toggled to OFF ) 

 

 

Locking MIDI out 

 

Once a control (potentiometer, switch or LFO) has to send MIDI data, if SHIFT function is active, then 
assigned MIDI events are not sent to the Bitstream MIDI output. 
Bitstream behavior stays unchanged, apart from the LCD which indicates locked MIDI data, as follow: 

 
 
 
 
 
 
 

Potentiometers & switches behavior 

 
From ROM V2.0, all the 40 potentiometers and all the 8 switches have two behavior options, 
described below. All can be independently programmed via the configuration software (> V3.1), 
available for both mode 1 and user defined modes. 

Potentiometers configuration: Hook / Jump 

 

This allows to set the selected potentiometer behavior as Hook or jump mode, hook is used to avoid 
jumps when switching from one group to another. The MIDI events are not sent until the potentiometer 
physical value is equal to the current group value. Jump is the common behavior, the Bitstream 
doesn't care about physical and group mismatches, and send MIDI once the potentiometer tweaked. 

Switches configuration: Toggle / Push 

 
This allows to set the selected programmable switch behavior as toggle or push mode. When a switch 
is configured as toggle, a single push/release toggle the actual switch value between Min to Max 
values, this mode is mainly used to program on/off functions as mutes, as opposed to the push mode 
that has for effect to send Max value once pushed, then Min value once released, this mode is mainly 
used to program momentary functions as transport. 

16  127   127  A 
Buttons:

 _

_

__

■■

16  LCK   127  A 

 

user defined str

 

Содержание Bitstream PRO






























Отзывы: