Wave Idea Bitstream PRO, Руководство пользователя, Страница: 5 / 29

Rev 3.1 - Page
5
Control LEDs:
- MIDI Led: On when MIDI data are generated by the controller
- On/Off LED: On when controller is turned ON
Group selector
Current group can be changed using the 3 positions of the slider button
LCD display:
First line indicates: Current MIDI channel / Controller number / Controller Level / Group
Second line indicates “Control Change” in Mode 1, or a “user defined alphanumeric string” assigned to
each potentiometer / switch / LFO for the user defined mode.
Snapshot button:
Allows saving / restoring values of all 40 potentiometers and Switches in non-volatile memory.
Mode Button:
Used to change the current operating mode:
Mode 1: Control Change
Mode 2: User defined MIDI messages
Potentiometers:
32 rotary potentiometers independently configurable : Hook / Jump behavior
LFO on/off button:
Allows to turn ON/OFF the LFO, a LED is associated to this button
LFO Waveform Selection type:
Used to select waveform type generated by the LFO.
Sine / Square / Triangle
LFO Waveform Amplitude:
Used to adjust waveform amplitude (0 < Amplitude < 64)
LFO Waveform frequency
Used to adjust waveform frequency (0.01 Hz < Frequency < 10 Hz)
LFO Waveform Offset
Used to adjust waveform offset (31 < Offset < 95)
Current MIDI Channel Selection:
Used to Select MIDI Channel from 1 to 16:
UP switch allows increasing MIDI Channel
DOWN switch allows decreasing MIDI Channel
When simultaneously pressed, these buttons perform a SHIFT function
When SHIFT active, LCD shows all 8 switches state (from ROM V2.0)
ON/OFF Buttons
These buttons play the same role as all potentiometers; they are used to control soft / devices, with
ON/OFF MIDI messages.
All the 8 buttons can be independently configured: Toggle / Pushbutton behavior
Slider Potentiometers:
8 programmable 30mm Slider potentiometers
11
12
13
14
1
2
3
4
5
6
7
8
9
10