
Rev 3.1 - Page
21
chained control
: # 38
c 1 = 39d =
''00100111'
MIDI channel
position
09h
control value
position
0Bh
checksum
position
0Ch
checksum start
position
04h
bits 7-6 = always '00'
-
-
-
-
bits 5-4 = '10''
09h + '01000000'
= 49h to send
-
-
-
bits 3-2 = '01'
-
0Bh + '00100000'
= 2Bh to send
-
-
bits 1-0 = '11'
-
-
0Ch + '01100000'
= 6Ch to send
-
crossfader OFF
- - -
04h + '00000000'
= 04h to send
crossfader ON
-
-
-
04h + '01000000'
= 44h to send
(3) Bitstream Pro Mode & Autosend
Mode
Potentiometer
Slider
Switch
Note
0 Jump
Push
-
1
Hook
Toggle
From ROM V2.0
Mode (potentiometer configuration): Hook/Jump
: This allows to set the selected potentiometer
behaviour as Hook or jump mode, hook is used to avoid jumps when switching from one group to
another. The MIDI events are not sent until the potentiometer physical value is equal to the current
group value. Jump is the common behaviour, the Bitstream don't care about physical and group
mismatches, and send MIDI once the potentiometer tweaked.
Mode (Switch configuration): Toggle/Push
: This allows to set the selected programmable switch
behaviour as toggle or push mode. When a switch is configured as toggle, a single push/release
toggle the actual switch value between Min to Max values, this mode is mainly used to program on/off
functions as mutes, as opposed to the push mode that has for effect to send Max value once pushed,
then Min value once released, this mode is mainly used to program momentary functions as transport
controls.
Autosend at startup
: Once checked, the MIDI event assigned to the current control will be
automaticaly send at the Bitstream Pro startup. This function is useful to configure the controlled
gear/soft with the Bitstream default values.
Содержание Bitstream PRO
Страница 1: ...OWNER S MANUAL Rev 3 1 April 2003...
Страница 4: ...Rev 3 1 Page 4 Front panel Description 1 3 5 6 4 2 7 8 9 10 11 12 13 14...
Страница 29: ...Rev 3 1 Page 29 Retailer...