Wave Idea Bitstream PRO, Руководство пользователя, Страница: 13 / 29

Rev 3.1 - Page
13
LCD Example
When configured as an externally synchronized LFO, if no external MIDI clock is detected, then the
following LCD screen should appear:
The above screen indicates that the LFO doesn’t generate data until a valid MIDI clock is detected.
Internal LFO synchronization
The right part of the potentiometer is used to sync LFO from Bitstream Pro internal time base.
It allows to modify this Frequency from 0.01 Hertz a 10 Hertz, and can be tweaked dynamically, in
order to produce real-time MIDI effects. On LCD, frequency range from 0 to 63, 0 means that LFO is
stopped, 1 means that a frequency of about 0.01 Hertz is generated, while 63 corresponds to a
frequency of about 10 Hz. Internal frequency can range from about 0.01 to about 10 Hz, according to
a 64 steps logarithmic scale.
LCD Example
The following graph illustrates frequency variation, with a fixed offset to 35.
LFO: SIN Amp: 63
FRQ: EX4 Ofs: 95
LFO: SIN Amp: 27
FRQ: I60 Ofs: 35
NO MIDI CLOCK
LFO NOT TRIGGED!