4
1.2 Status Display
With the ODU connected the power should be applied to the unit, 12VDC via the 4 pin
XLR connector, utilizing the standard pin configuration. On power up the CP Logo,
should be seen on the splash screen followed by the home status as shown below.
Outlined is the status of each port connection, reported Connected or Disconnected.
The display is used in conjunction with the navigation buttons to interrogate the unit
and read the frequency and power output of the ODU. Notification of a Tally to that
port is indicated by R for RED Tally and G for GREEN tally
1.3 Manufacturing Status
If the NAV button is pressed once the Camera manufacture menu can be seen. By tipping the
NAV button up and down different manufactures can be chosen and if the relevant license has
been obtained, selected. When the desired manufacturer has been reached, the NAV button is
pressed once to select. The display will revert back to the Manufacture Status
NOTE: The power must be cycled before the selection will be actioned by the internal
processor.
1: Connected
RG
2: Disconnected
3: Disconnected
4: Disconnected
Main Menu
Camera Manufacture
Camera Manufacture
Sony
